%{tishi_zhanwei}%

Keyword suggestions: Emergency Exit Lock Series | Handle Lock Series | Floor Spring Series | Hinge Series

+
  • 2-1(1720080254937).png
  • 2-2(1720080255755).png

1101 Surface-Mounted Dust Cover


We continuously research and develop innovative door hardware products, striving to meet or even exceed the standards of leading international brands. Several of our products have successfully passed U.S. UL fire‑resistance testing and certification. In particular, our fire‑rated door lock series has attained both the ANSI Class 1 standard in the United States and dual CE certification under European Union regulations. These achievements demonstrate that, in terms of production equipment, quality control, and R&D capabilities, our company stands on par with the world’s most advanced manufacturers in this field.

Category:

Dust-Proof Strip Series

Keywords: Dongguan Technology

Message
  • Product Description

    Precautions: Not suitable for installation in areas with thresholds.

    A. 1101# The external dust guard primarily provides protection against wind, dust, and insects, and is installed at the bottom of the door.

    When the door opens, the dust‑proof strip automatically lifts off the floor; as the door swings open, an adjusting nut presses against the door frame, causing the strip to spring downward under pressure and seal tightly against the floor.

    B. Applicable door gap: 3–16 mm.

    C. Anti‑seat device length H: 900 mm (can be shortened to a minimum of 580 mm) and non‑standard dimensions.

    D. Sealing strip material: Made of acid‑resistant, alkali‑resistant, cold‑resistant, high‑temperature‑resistant, and aging‑resistant rubber.

    Installation Instructions:

    1. First, confirm the installation direction: the end with the adjusting nut should face the hinge side, and the sealing strip should be oriented downward.

    2. Reversal (see Figure 2) (If reversal is not required, proceed directly to Step 3).

    3. Confirm the dust collector length:

    1101# The exterior dust guard (including the decorative cover) shall be equal to the door leaf width minus 3–5 mm.

    4. Cut the dust collector to length:

    Cut the dust seal to the required length at the door lock end, based on the width dimensions of the door frame and door leaf.

    5. Adjustment;

    After installation, turn the door‑handle adjustment nut outward several turns. Then, position the strike plate according to the adjustment nut’s alignment with the door frame so that it can abut the frame. Next, check the seal strip’s fit against the floor; if a tighter seal is desired, simply unscrew the adjustment nut slightly and secure the internal set screw with the included hex key.

Consult Now

If you are interested in our products, please leave your email address, and we will contact you as soon as possible. Thank you!

Submit Message