%{tishi_zhanwei}%

Keyword suggestions: Emergency Exit Lock Series | Handle Lock Series | Floor Spring Series | Hinge Series

Service Support

FAQ


Image Name

Can the indoor handle be turned, but the door won’t open?


Image Name

The latch is stuck—most likely due to misalignment of the door frame strike plate. Fine-tune the position of the strike plate, and gently pry the latch with a thin card; avoid forcing the handle to prevent breakage.

Image Name

Is it hard to insert or remove the key from the door lock?


Image Name

The lock cylinder has accumulated dust and rusted. Blow out the dust from the cylinder, then apply pencil lead powder as a lubricant—never use machine oil, as it can cause the pins to seize over time.

Image Name

Does it automatically pop open after the door is closed and won’t lock?


Image Name

The latch and the door frame’s strike plate are misaligned. Adjust the door frame’s metal plate and sand the edges of the strike plate to ensure the latch engages smoothly when the door is closed.

Image Name

Is the exterior handle spinning freely and unable to lock?


Image Name

The handle’s square rod has come loose and shortened. Disassemble the panel, reinstall the square rod, and add an anti-slip clip; if the dimensions are incorrect, replace it with a compatible square rod.

< 12 >